Free restaurant toolsFree tool

Restaurant floor plan maker count your seats before you buy a chair

Set the size of your dining room, drag in two-tops, four-tops and rounds, and the planner counts your seats, works out the floor area each seat gets and marks any tables placed too close together. Print the plan or save it as an image. Free, no sign-up, in feet or metres.

Add a table

1234567891011

Tables

Drag a table on the plan, or pick it here and use the arrow keys (Shift for bigger steps), R to turn it and Delete to remove it.

Pick a table to turn, copy or remove it.

Your plan is kept in this browser only. It is never sent to tamr.

Restaurant planners size a dining room with a rule of thumb for floor area per seat, aisles included: about 10 to 12 square feet for quick service, 12 to 15 for full service and 18 to 20 for fine dining. Divide your dining room's area by the figure for your style of service to get a first seat count.

These are starting points, not limits. Your fire code or fire risk assessment sets how many people the room may hold, and the kitchen, bar, toilets and storage need their own space on top.

Floor area per seat, by style of service
Style of servicePer seat (sq ft)Per seat (m²)Seats in 1,000 sq ft
Quick service and counters10 to 120.9 to 1.183 to 100
Full service12 to 151.1 to 1.467 to 83
Fine dining18 to 201.7 to 1.950 to 56

Leave about 18 inches (45 cm) behind a table's edge for a seated guest's chair, and around 4 to 5 feet (1.2 to 1.5 m) between the edges of two tables whose chairs back onto each other. The planner checks every pair against the gap you set, 4 feet to start.

In the US, the 2010 ADA Standards ask for at least 5% of the seating at dining surfaces to be accessible, reached by a route at least 36 inches (91 cm) wide. Keep the main route from the door to the host stand and the kitchen pass wider than the gaps between tables: it carries guests and plates at the same time.

A 36 inch square table seats four, and a 42 inch round does the same in a softer shape. Two-tops you can push together are the most flexible tables in the room: two of them make a four, three make a six.

Common restaurant table sizes in the planner
TableSize (inches)Size (cm)Seats
2-top30 square76 square2
4-top36 square91 square4
6-top36 x 7291 x 1836
Round 442 round107 round4
Round 660 round152 round6
Round 872 round183 round8
Bar seat18 round46 round1

To plan a restaurant floor plan, measure the dining room, keep the space around doors, exits, the bar and the kitchen pass clear, pick a space per seat for your style of service, place the large tables first and check every gap. Then walk it with a tray before you buy furniture.

  1. 1Measure the dining room

    Measure the width and depth of the room where guests sit, wall to wall, and set them in the planner.

  2. 2Leave room for what cannot move

    Note the doors, fire exits, bar, kitchen pass, toilets and columns. Keep their space and the routes between them empty.

  3. 3Pick a space per seat

    Choose a target for your style of service: about 10 to 12 square feet a seat for counters, 12 to 15 for full service, 18 to 20 for fine dining.

  4. 4Place the large tables first

    Put rounds and six-tops where groups will sit, then fill the walls with two-tops you can push together.

  5. 5Check the gaps

    Fix every pair of tables the planner marks as too close, and keep a clear route from the door to every table.

  6. 6Walk it before you buy

    Print the plan, mark the tables on the floor with tape, and walk the routes carrying a tray.

tamr Bookings works on a floor plan of your room: every online booking holds a real table that fits the party. Import your plan from a PDF, a photo or a link, or draw it in tamr, and your host sees tonight's tables live in the Service app. Bookings are part of tamr Pro.

  • Import the plan you have

    A PDF, a photo, this planner's image, or a link.

  • A real table for every booking

  • Big parties come in as requests

See bookings on your floor plan

How much space does each seat need in a restaurant?

Restaurant planners use rules of thumb for the dining room, aisles included: about 10 to 12 square feet a seat for quick service, 12 to 15 for full service and 18 to 20 for fine dining. That is roughly 0.9 to 1.1, 1.1 to 1.4 and 1.7 to 1.9 square metres. Your fire code sets the hard limit.

How far apart should restaurant tables be?

Plan about 18 inches (45 cm) behind a table's edge for a seated guest's chair, and around 4 to 5 feet (1.2 to 1.5 m) between the edges of two tables whose chairs back onto each other. In the US, the ADA asks for an accessible route at least 36 inches wide to the accessible tables.

How many seats fit in 1,000 square feet?

About 67 to 83 seats for full service, at 12 to 15 square feet a seat, about 50 to 55 for fine dining and up to 100 for quick service. Count only the dining room: the kitchen, bar, toilets and storage need their own space on top.

What size table seats four people?

A 36 inch (91 cm) square table or a 42 inch (107 cm) round seats four. Two-tops are usually 24 to 30 inches square, a six-top is about 36 by 72 inches, and rounds of 60 and 72 inches seat six and eight.

Does a restaurant floor plan have to be accessible?

In the US, the 2010 ADA Standards require at least 5% of the seating at dining surfaces to be accessible, with an accessible route of at least 36 inches to it. In the UK, the Equality Act asks for reasonable adjustments, and your fire risk assessment sets how many people the room may hold.

Can I use this floor plan for bookings in tamr?

Yes. tamr Bookings needs a floor plan of your room, and it can import one from a PDF, a photo or a link: download this plan as an image and import it, or draw the room in tamr. Every booking then holds a real table on it. Bookings are part of tamr Pro.

Put your menu on tamr for free. On tamr Pro, add your floor plan and customers book a real table from your menu, your bio link or the AI waiter.

Or send us your menu on WhatsApp and it is live today.